TEST PRODUCT
NX4

Make: DUCATI Origin: Italy Model: 996 SPS Vehicle type Road bike Capacity: 996 cm3 Year: 1999 Condition: Used Reference: AMR911 Mileage: 40.428 AVAILABILITY: Inmediately Registered: PRICE: Ask
AMGP553
2013
125cc
Race Bike
Used
274
Custom value

PRICE

Trade in a vehicle
Trade in a vehicle
Trade in a vehicle
Why buy from us ?

See Also

these bikes might interest you

QUICK LOOK

HONDA NSF250R

0 €

Engine Honda
44 hp - 13.200 RPM
4Strokes - 80 KG

QUICK LOOK

YAMAHA TZ125 1979

0 €

Make: YAMAHA Model: TZ 125 Year: 1979 Condition: Used Reference: AMC100

See Comparable

Recently viewed

QUICK LOOK

TEST PRODUCT

12000 € 9000 €

Make: DUCATI Origin: Italy Model: 996 SPS Vehicle type Road bike Capacity: 996 cm3 Year: 1999 Condition: Used Reference: AMR911 Mileage: 40.428 AVAILABILITY: Inmediately Registered: PRICE: Ask

Information

BIKE
Brand Honda
Model RS250R
Year 2005
Condition Used
Frame number -
Engine number -
Reference number AMGP528
-

Engine

SPECS
Engine Honda
Power 92 CV / 12.500 rpm
Displacement 250 cm3
Engine Km 800 (KM)
Airbox -
Exhaust Samba
Clutch Dry
Radiator -

Frame Parts

SPECS
Front wheel Marvic
Rear wheel Marvic
Front fork Showa
Rear shock Showa
Steering damper -
Front Brake Master Cyl. Brembo
Rear Brake Master Cyl. -
Front Brake Caliper/s Brembo
Rear Brake Caliper Nissin
Front Brake Disk/s Nissin
Rear Brake Disk Nissin

Electronic Components

SPECS
Data acquisition HRC
Wiring & electronical HRC
ECU HRC
Quickshifter GP

Sizes

SPECS
Length 1954 mm
Width 640 mm
Height 1090 mm
Weight 101 Kg





Other information

Bike in good condition and ready to race.The bike will be delivery fully revised.Engine fully revised and ready to run.


    • 276 cubic inch Ford 59A flathead V8 / .125 overbore / Approximately 200 horsepower
    • Ford 9-inch rear axle / 3.43 gears
    • 16-inch wheels
    • Professional build completed in 2013
    • Cherry Bomb glasspack mufflers
    • Custom suspension
    • All-steel Brookville Roadster body / Channeled over a custom frame / Ford Monsoon Maroon paint
    • T5 5-speed manual transmission
    • 12-inch drum front brakes / 11-inch drum rear brakes
    • Custom leather interior

    SUMMARY

    • Professional build completed in 2013
    • 276 cubic inch Ford 59A flathead V8 / .125 overbore / Approximately 200 horsepower
    • T5 5-speed manual transmission
    • All-steel Brookville Roadster body / Channeled over a custom frame / Ford Monsoon Maroon paint
    • Custom leather interior
    • Custom suspension
    • Ford 9-inch rear axle / 3.43 gears
    • 16-inch wheels
    • 12-inch drum front brakes / 11-inch drum rear brakes
    • Cherry Bomb glasspack mufflers

What do you get when you combine the aesthetic traits of an old school hot rod with months of professional customization? This incredible Ford roadster! Mixing the universal appeal of SoCal style with the road going prowess of a well-massaged custom, this slick classic is one impressive build that provides its owner the best of both worlds. And what’s better: you can own and drive this exclusive show stopper for a fraction of the money and time it takes to complete a ground-up build. If you’re an anxious buyer who’s tired of the ‘garage furniture’ culture that seems to pervade the classic car hobby, this stunning Ford is one of the coolest road-ready hot rods your money can buy!

BODYWORK/TRIM

This clean custom’s solid Brookville Roadster body began life as high quality steel that was worked into a lean, long and low profile by the pros at Mooresville, North Carolina’s Man Made Legends. As you can probably tell, that process included a lot more than simple sanding and filling, as the car’s taut fuselage was stretched over a custom frame with the help of careful channeling. When you want to paint a vintage Ford hot rod, it’s best to go with vintage Ford pigment, like this roadster’s 1948 Monsoon Maroon 2-stage. Finishing touches took the form of Ford Twolite headlamps, a simple tag bracket, blue-dot taillights and a body-matched window frame. And in the summer of 2013, this classic hit the road as a delightfully simplistic showpiece that mixes the skill of experienced fabricators with the integrity of experienced builders.

ENGINE

Check the glossy engine bay and you’ll find 276 cubic inches of Ford 59A flathead that, thanks to approximately 200 horsepower, make this custom a blast to drive! An NOS short block that still wore factory tags prior to its inclusion in the build, that stalwart powerplant maintains rock-solid reliability in literally every season. On top of the timeless mill, mesh-covered Stromberg 97s jam steady wind and fuel in to a Navarro high compression intake. That intake perfectly complements Navarro high compression heads, which cap .125 overbored cylinders. Those cylinders combust with the help of adjustable lifters, an Isky 400 Jr. cam and a 4-inch Merc crank. At the sides of the block, monochromatic block hugger headers feed straight-out pipes that are cinched around brash Cherry Bomb glasspacks. At the front of the block, a dressed generator shades a traditional distributor, which sequences fire through chrome-cased Flathead Jack plug wires. In front of those cables, a beefy radiator, complete with dual electric puller fans, funnels water through polished stainless tubes. And everything, from the car’s finned coil cover and chrome dipstick to its glass fuel bowl and Hildebrandt oil filter, is clean, simple and old school cool.

DRIVETRAIN/SUSPENSION

In keeping with its ‘custom but functional’ theme, this first class Ford rides a custom, fully reinforced chassis that’s stanced out of 2×4 rectangular tubing. The rowdy flathead spins power through a tough T5 5-speed, which twists a Ford 9-inch axle around fresh 3.43 gears. At the head of those heavy duty components, a drilled I-beam axle provides four inches of drop. Opposite that roller, fresh QA-1 coil-overs plant the car’s exceptionally light rear-half. That suspension counters the engine’s grunt with a combination of 11 and 12-inch drums. And all that hardware rolls on matte-finished steelies, which lap 6.00-16 Coker-sourced whitewalls around stylized trim rings and polished Ford center caps.

INTERIOR

Take a look inside this custom and you’ll find a stylishly simple interior that, in the name of timelessness, has been carefully pieced together. At the center of the cockpit, leather-trimmed bomber seats wrap the driver and one passenger in nostalgic authenticity. In front of those seats, a body-matched dash hangs crisp Stewart Warner telemetry behind an Auburn-style, engine-turned instrument panel. Below that dash, piped wool carpet floats a polished Hurst shifter amid billet foot pedals and custom kick panels. At the sides of that carpet, padded leather doors frame trick poppers. In front of the driver, a polished Bell steering wheel spins a leather-wrapped rim. And behind the passengers, a small trunk anchors a modern battery in front of a sizable fuel tank.

This striking Ford is a nicely finished classic that was built to be driven AND seen. It uses top-notch customization from some of the best talent in the business to create a unique car that mixes killer personality with awesome curb appeal. If you’re looking for a road ready hot rod that’s guaranteed to draw a crowd wherever you go, your search is officially over!

Information

BIKE
Brand Honda
Model RS250R
Year 2005
Condition Used
Frame number -
Engine number -
Reference number AMGP528
-

Engine

SPECS
Engine Honda
Power 92 CV / 12.500 rpm
Displacement 250 cm3
Engine Km 800 (KM)
Airbox -
Exhaust Samba
Clutch Dry
Radiator -

Frame Parts

SPECS
Front wheel Marvic
Rear wheel Marvic
Front fork Showa
Rear shock Showa
Steering damper -
Front Brake Master Cyl. Brembo
Rear Brake Master Cyl. -
Front Brake Caliper/s Brembo
Rear Brake Caliper Nissin
Front Brake Disk/s Nissin
Rear Brake Disk Nissin

Electronic Components

SPECS
Data acquisition HRC
Wiring & electronical HRC
ECU HRC
Quickshifter GP

Sizes

SPECS
Length 1954 mm
Width 640 mm
Height 1090 mm
Weight 101 Kg

 

Other information

Bike in good condition and ready to race. The bike will be delivery fully revised.Engine fully revised and ready to run (300 km since last service)
Extra parts included with the bike
*Optional spare parts available by an extra cost.

Email Us

Contact Us Regarding this Vehicle
Receive Newsletter

I accept the privacy

Finance

Services

prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba prueba
What is Lorem Ipsum? Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum. Why do we use it? It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout. The point of using Lorem Ipsum is that it has a more-or-less normal distribution of letters, as opposed to using 'Content here, content here', making it look like readable English. Many desktop publishing packages and web page editors now use Lorem Ipsum as their default model text, and a search for 'lorem ipsum' will uncover many web sites still in their infancy. Various versions have evolved over the years, sometimes by accident, sometimes on purpose (injected humour and the like).